Home > BRANDS > Kim Lighting > Kim Lighting Wall Mount Lights > Kim WDM-U-48L-85-4K7-3-UNV-DBS 85W Wall Director Medium, Up Mounting, 48 LEDs, 10000 Lumens, 4000K, 80 CRI, Type III Distribution, 120-277V, Dark Bronze Gloss Smooth Finish
Alternative Views:	Our Price: $1,195.39 Model: KIM-WDM-U-48L-85-4K7-3-UNV-DBS Qty:

Technical Spec Downloads   Download PDF Specification Download PDF Instruction Manual Technical Spec PRODUCT FAMILY SPECIFICATIONS CONSTRUCTION Optical housing is a one-piece, die-cast low copper (<0.6%) aluminum alloy with integral heat sink. The housing rotates against mounting arm housing to provide -5° to 10° of adjustment with degree markers label. At 0° adjustment, lens is totally concealed from view above horizontal with fixture mounted in the downward position. Mounting arm housing is one-piece diecast, low copper (<0.6%) aluminum alloy with provisions for tilt mechanism. Mounting arm fastens to the mounting plate with keyhole slots freeing both hands for securing and wiring. One stainless steel socket-head screw on the tilt mechanism frees the optical housing to rotate for aiming. Tightening the screws locks the housing and lens frame together with sealing provided by a silicone gasket. For visual aiming, adjustment may be accomplished with the fixture on. Lens Frame is a one-piece, die-cast low copper (<0.6%) aluminum alloy with integral cooling fins to dissipate driver thermal. Finish: fade and abrasion resistant, electrostatically applied, thermally cured, triglycidal isocyanurate (TGIC) polyester powdercoat Bracketry and hardware shall be stainless steel OPTICS LEDs mount to a metal printed circuit board assembly (MCPCB). Optical lenses are clear injection molded PMMA acrylic. Secondary lens is impact resistant 1/8” tempered glass with anti-reflective coating. INSTALLATION Junction box (by Others): Standard with steel, quick-mount junction box plate that mounts directly to 4” J-Box. Mounting plate is stainless steel and features a one-piece EPDM gasket on back side of plate to firmly seal fixture to wall surface, forbidding entry of moisture and particulates. Fixtures must be grounded in accordance with national, state and/or local electrical codes. Failure to do so may result in serious personal injury. SERVICING Housing should hang freely in an open service position for inspection of primary wire connections. Once in service position, the housing can be removed for service by sliding the assembly to the left (for down mounting) or to the right (for up mounting) and disconnecting the wiring plugs. Driver assembly shall be mounted to a prewired internal tray with quick disconnects for removal. ELECTRICAL Universal voltage, 120 through 277V with a ±10% tolerance. Driver is Underwriters Laboratories listed. High voltage configurations, 347/480. Driver has a 0-10V dimming interface for multi-level illumination options. Driver is Underwriters Laboratories listed. "Thermal Shield", secondary side, thermistor provides protection for the sustainable life of LED module and electronic components. Drivers have a greater than a 0.9 power factor, less than 20% harmonic distortion, and be suitable for operation in -40°C to 40°C ambient environments. Luminaire shall be capable of operating at 100% brightness in a 40°C environment. Both driver and optical array have integral thermal protection that will dim the luminaire upon detection of temperatures in excess of 85°C. Modular wiring harness in the service area provides user access to the dimming circuitry. Optional factory programmed dimming profile. Surge protection: 10,000k in parallel, 20,000k in series. Wiring: No. 18AWM rated 90°C, wet rating. BUTTON PHOTOCELL Optional universal voltage (120-277V) button photocontrol for dusk to dawn energy savings. Photocontrol is factory installed inside the housing with a fully gasketed sensor on the side wall. For multiple fixture mountings, one fixture is supplied with a photocell to operate the others. NX LIGHTING CONTROLS NX lighting controls platform utilizes a Distributed Network Architecture (DNA) that connects intelligent devices including luminaires, controllers, panels, occupancy sensors, photocells, wall switches and dimmers, creating a system with an unmatched level of reliability, scalability and simplicity OPTIONAL FUSING: SF for 120, 277, and 347 Line volts DF for 208, 240, and 480 Line volts Hight temperature fuse holders factory installed inside the fixture housing. Fuse is included. OPTIONAL BACKUP BATTERY Integral battery backup provides emergency path of egress lighting for the required 90 minutes for 0°C ambient environments. CAUTION Fixtures must be grounded in accordance with national, state and/or local electrical codes. Failure to do so may result in serious personal injury. CERTIFICATIONS AND LISTINGS Listed to UL1598 and CSA C22.2#250.0- 24 for wet locations and 40˚C ambient temperatures IEC 66262 Mechanical Impact Code IK08 IP66 certified RoHS compliant This product qualifies as a "designated country construction material" per FAR 52.225-11 Buy American-Construction Materials under Trade Agreements effective 6/06/2020. See Buy American Solutions. WARRANTY 5 year warranty Related Items Kim Lighting WF20-P-9L5KUV-WHT Wall Forms LED Light 9 LED 5000K, White Finish Our Price: $529.49

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item: BRANDS > Kim Lighting > Kim Lighting Wall Mount Lights