Hubbell Outdoor Lighting RWL1-48L-20-4K7-3-120-DBT-PC-EH Ratio Wall 1 LED Wallpack, 2500 Lumens, 4000K, 70 CRI, IES Type III Distribution, 120V, Dark Bronze Matte Textured, Button Photocell, Emergency Battery with Heater Option

Home > BRANDS > Hubbell Outdoor Lighting > Hubbell Outdoor Lighting Wall Mount > RWL Ratio Wall LED Wallpack >

Alternative Views:

Our Price: $737.48

Usually Ships in 4-6 business days. Urgent Project? Contact Us.

Model: HUBBEL-RWL1-6

Qty:

Technical Spec

Downloads

Technical Spec
PRODUCT SPECIFICATIONS
CONSTRUCTION

Die-cast housing with hidden vertical heat ins that are optimal for heat dissipation while keeping a clean smooth outer surface
Corrosion resistant, die-cast aluminum housing with powder coat paint finish
Powder paint finish provides durability in outdoor environments. Tested to meet 1000 hour salt spray rating

OPTICS

Entire optical aperture illuminates to create a larger luminous surface area resulting in a low glare appearance without sacrificing optical performance
48 or 160 midpower LEDs
3000K, 4000K or 5000K (70 CRI/80 CRI) CCT
Zero uplight distributions
LED optics provide IES type II, III and IV distributions. Type II only available in RWL2 configurations

INSTALLATION

Quick-mount adapter provides easy installation to wall or to recessed junction boxes (4" square junction box)
Designed for direct j-box mount.
Integral back box contains 1/2" conduit hubs
Integral back box standard with Dual Driver, Dual Power Feed, NX, Wiscape and battery versions (battery versions for RWL1 only)

ELECTRICAL

120V-277V universal voltage 50/60Hz 0-10V dimming drivers
347V and 480V dimmable driver option for all wattages above 35W
Ambient operating temperature -40˚C to 40˚C
Driver RoHS and IP66
10kV Surge Protector optional
Drivers have greater than .90 power factor and less than 20% Total Harmonic Distortion
Dual Driver option provides 2 drivers within luminaire but only one set of leads exiting the luminaire, where Dual Power Feed provides two drivers which can be wired independently as two sets of leads are extended from the luminaire. Both options can not be included in one same fixture.
Dimming drivers are standard and dimming leads are extended out of the luminaire unless control options require connection to the dimming leads. Must specify if wiring leads are to be greater than 6” standard.

CONTROLS

Photo control, occupancy sensor and wireless available for complete on/off and dimming control
Button photocontrol is suitable for 120-277V operation
7-pin ANSI C136.41-2013 photocontrol receptacle option available for twist lock photocontrols or wireless control modules (control accessories sold separately)
NX Distributed Intelligence available with in fixture wireless control module, features dimming and occupancy sensor wiSCAPE available with in fixture wireless control module, features dimming and occupancy sensor
Integral Battery Backup provides emergency lighting for the required 90 minute path of egress
Battery Backup suitable for operating temperatures -25˚C to 40˚C. RWL1 battery is 12.5W RWL2 battery is 18W
Dual Driver and Dual Power Feed options creates product configuration with 2 internal drivers for code compliance
Please consult brand or sales representative when combining control and electrical options as some combinations may not operate as anticipated depending on your application.

CERTIFICATIONS

Listed to UL1598 and CSAC22.2#250.0-24 for wet locations
IP65 rated housing
This product qualifies as a "designated country construction material" per FAR 52.225-11 Buy American-Construction Materials under Trade Agreements effective 04/23/2020. See Buy American Solutions
Not all product variations listed in this document are DLC (DesignLights Consortium Qualified). Refer to designlights.org for most up-to-date list.

WARRANTY

5 year limited warranty

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

BRANDS > Hubbell Outdoor Lighting > Hubbell Outdoor Lighting Wall Mount > RWL Ratio Wall LED Wallpack