Hardwired Photoelectric Smoke & CO Combination alarm with 10-Year Sealed Lithium Battery Backup & Voice.

• Photoelectric Smoke Sensing Technology
• Electrochemical CO Sensor
• 10-Year CO Sensor/10-Year Alarm Life/10-Year Battery Backup
• Voice Warning with Location
• CO Peak Function—Captures highest CO level recorded for post-incident investigation
• Latching Alarm Indicator—Easily identifies initiating alarm even after condition is silenced
• Single Test/Silence Button
• End-of-Life Signal—Provides audible notice when alarm needs to be replaced after 10 years
• 10-Year Limited Warranty

Model #	SC7010LBLV
Weight	10.6 oz
Dimension	5.4"W x 1.4"D x 5.4"H
Operating Voltage	120V AC 60Hz with 3V Sealed Lithium battery backup
Power (Standby/Alarm)	0.012 A / 0.065 A
Temperature Range	40°F (4°C) to 100°F (38°C)
Humidity Range	10% to 95% relative humidity (RH)
Audio Alarm	85dB at 10 feet
Voice Output	Choice of 13 pre-programmed locations warns of smoke or CO danger and location of danger
Test/Silence	Electronically simulates smoke or CO condition, causing the unit to alarm. Press and hold test/silence button
Alarm Reset	Automatic when smoke and/or CO clears
Interconnections	Up to 18 units of First Alert or BRK Smoke, CO and Heat Alarms. Maximum of 12 smoke alarms
Smoke/CO Sensor	Photoelectric/Electrochemical
Indicator Lights/Sounds	AC Power: Constant Clear LED Light
	DC Power: Intermittent Clear LED Light
	Local Alarm: Red LED flashes, Voice: "Smoke" or "CO" with location
	Remote Alarm: Red LED off, Voice: "Smoke" or "CO" without location
Latching Alarm Indicators	Smoke Alarm: Red LED 2 seconds ON, 2 seconds OFF
	CO Alarm: Blue LED 2 seconds ON, 2 seconds OFF
	Battery End of Life: Green LED 2 seconds ON, 2 seconds OFF
Listing	Conforms to UL STD 217 & UL STD 2034