Class I: A hazardous location in which flammable gases or vapors may be present in the air in sufficient quantities to be explosive or ignitable, such as petroleum refineries, aircraft hangars, dry cleaning plants, utility gas plants or storage areas for liquified petroleum or natural gas, and spray finishing areas.

Division 2: Abnormal condition, where ignitable concentrations of flammable gases, vapors or liquids are not like to exist under normal operating conditions, for example:

Groups A - D: The gases and vapors of Class 1 locations are broken into four groups by the Code: A,B,C, and D. These materials are grouped according to the ignition temperature of the substance, its explosion pressure, and other flammable characteristics.

T4A

Electric lighting fixtures for use in hazardous (classified) locations

Suitable for wet locations. Suitable for mounting within 4 ft (1.2m) of the ground.

Ingress protection rating of IP66 for dust and water

This product is on the Design Lights Consortium (DLC) Qualified Products List and is eligible for rebates from DLC Member Utilities. Designed to meet DLC 5.1 requirements.

Constant Current, Class 1, 120-277V, 50/60 Hz, 120V: 0.51A, 208V: 0.32A, 240V: 0.28A, 277V: 0.24A

Driver includes dimming control wiring for 0-10V dimming systems. Requires separate 0-10V DC dimming circuit. Dims down to 10%.

2.77% at 120V, 7.86% at 277V

99.7% at 120V, 91.2% at 277V

L/N-G 10KV, L-N 6KV

7H x 6V Beam Spread

The minimum starting temperature is -40°C (-40°F)

Suitable for use in up to 55°C (131°F)

Die-cast aluminum

High-reflective polycarbonate

Yoke

Clear glass lens

Rotates in 6 degree increments

EPA = 0.67

High-temperature silicone

Mercury and UV free. RoHS-compliant components.

Formulated for high durability and long-lasting color

Long-life, high-efficacy, surface-mount LEDs

RAB's range of Correlated Color Temperature follows the guidelines of the American National Standard for Specifications for the Chromaticity of Solid State Lighting (SSL) Products, ANSI C78.377-2017.

7-step MacAdam Ellipse binning to achieve consistent fixture-to-fixture color

RAB values USA manufacturing! Upon request, RAB may be able to manufacture this product to be compliant with the Buy American Act (BAA). Please contact customer service to request a quote for the product to be made BAA compliant.

Equivalent to 250W Metal Halide (MH) or 200W High Pressure Sodium (HPS)