Lithonia WF4 SWW5 90CRI ORB 4" Round Wafer-Thin LED Downlight, Switchable CCT 2700K, 3000K, 3500K, 4000K, 5000K, 90 CRI, Oil Rubbed Bronze

Home > BRANDS > Lithonia Lighting > Lithonia Recessed Lighting > Lithonia WF Series Switchable Color Temperature Wafer LED Downlight >

Alternative Views:

Our Price: $28.58

Usually Ships in 3-5 business days. Urgent Project? Contact Us.

Model: LITHONIA-WF4-110570

Qty:

Technical Spec

Downloads

Technical Spec
PRODUCT FAMILY SPECIFICATIONS
Housing

Polycarbonate injection molded outer frame, with steel back plate. Non-conductive dead-front trim design suitable for a wide range of applications and codes requiring a non-conductive lens
FT4 3-pin plenum rated cable connector to connect from module to remote driver box
Steel spring clip for easy installation. 4", 6" or 8" cut out template is provided to ensure a correct sized hole is cut into ceiling for proper installation of the trim. Size of hole should not exceed 4-1/4" for the WF4, 6-1/4" for the WF6 and 8-1/4" for the WF8
Can be installed from 3/8" to 1 1/2" ceiling thickness
Can be removed from below the ceiling for service or replacement.

LED Light Engine

Switchable white color temperature from 2700K, 3000K, 3500K, 4000K, 5000K
90 CRI minimum
Color accuracy within 4 step McAdams Ellipse at the end CCT (2700K and 5000K), within 6 step McAdams Ellipse in the middle CCT (3000K, 3500K, and 4000K)
Dimming 100% to 10% with most standard incandescent dimers (see list of approved dimmers).

Driver

Connect directly to 120V Class-2 (CAN ICES-005 (B) / NMB-005 (B)) LED driver
120V 60 Hz constant current driver provides noise free operation
IC rated driver with convenience of a switch to choose between 5 selectable color temperature options ranging from 2700K (warm white), 3000K, 3500K, 4000K, or 5000K (daylight)
The isolated driver integrated inside steel remote box with four 7/8" knockouts with slots for pryout. Suitable for pulling wires with the 12 cubic-inch wiring compartment to accommodate up to (6) 14 gauge insulated conductor or (4) 12 gauge insulated conductors, making the Wafer LED Downlights much easier to wire in 2in/2out (plus ground) daisychain applications and contractor friendly
2" plenum space required for the installation of the WF6 and WF8 driver boxes; 3"plenum space required for the installation of the WF4 driver box
Suitable for installation in t-grid and drop ceiling applications with universal new construction pan.

Optical System

Edge-lit LED technology uses light guided plate to distribute light
Polycarbonate lens provides even illumination throughout the space
Efficient system that can produce over 670 lumens while using 9W (WF4), 970 lumens while using 13W (WF6) and 1640 lumens while using 19W (WF8)
Replaces 65W incandescent (WF4), 75W incandescent (WF6) and 100W incandescent (WF8).

Life Rated for 50,000 hours at 70% lumen maintenance.
Labels

CSA certified to US and Canadian safety standards
ENERGY STAR certified product
Suitable for wet location, covered ceiling
Air-Loc certified in accordance with ASTM E283-2004
NOM Certified
Can be used to comply with California Title 24 Part 6 High Efficacy LED light Source Requirements
U.S. Patent No. 10,681,784.

Testing All reports are based on published industry procedures; field performance may differ from laboratory performance.
Warranty 3-year limited warranty

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

BRANDS > Lithonia Lighting > Lithonia Recessed Lighting > Lithonia WF Series Switchable Color Temperature Wafer LED Downlight