Request a Quote

  Home > BRANDS > Kim Lighting > Kim Lighting Area Lights > ARA2 >

Kim Lighting 1A-ARA2-54L-750-4K9-3-UNV-DBT-PC-SF-SCH-S LED Area Light, Single Arm Mount, 54 LEDs, 14000 Lumens, Type III Dist, No Lens, 120-270V, Dark Bronze Matte Textured, Button Photocell, 120, 277, 347 Fuse Options, Square Pole Mounted
Kim Lighting 1A-ARA2-54L-750-4K9-3-UNV-DBT-PC-SF-SCH-S LED Area Light, Single Arm Mount, 54 LEDs, 14000 Lumens, Type III Dist, No Lens, 120-270V, Dark Bronze Matte Textured, Button Photocell, 120, 277, 347 Fuse Options, Square Pole Mounted


 
Alternative Views:


Our Price: $1,966.80
Request Large Quantity Quote




Model: KIM-1A-ARA2-42
Qty:

Technical Spec Downloads
 
Technical Spec
PRODUCT FAMILY SPECIFICATIONS
CONSTRUCTION
  • One piece die-cast housing, low copper (<0.6% Cu) Aluminum Alloy with integral cooling ribs over the optical chamber and electrical compartment
  • Solid barrier wall separates optical and electrical compartments
  • Double-thick wall with gussets on the support-arm mounting end
  • Housing forms a half cylinder with 55� front face plane providing a recess to allow a flush single-latch detail
  • All hardware is stainless steel or electro-zinc plated steel
  • Finish: fade and abrasion resistant, electrostatically applied, thermally cured, triglycidal isocyanurate (TGIC) polyester powdercoat
  • One-piece die-cast, low copper (<0 6% Cu) aluminum alloy lens frame with 1" minimum depth around the gasket flange
  • Optional clear 1/8" thick tempered glass lens retained by eight steel clips with full silicone gasketing around the perimete
  • Optional, fixture supplied with a one-piece flat, clear, UV stabilized polycarbonate, fully gasketed, replacing the standard tempered glass lens. CAUTION: Use only when vandalism is anticipated to be high. Useful life is limited by UV discoloration from sunlight. A program of regular inspection and periodic replacement is highly recommended to maintain optimum fixture performance
  • One-piece extruded aluminum arm with internal bolt guides and fully radiussed top and bottom
  • Luminaire-to-pole attachment is by internal draw bolts, and includes a pole reinforcing plate with wire strain relief
  • Arm is circular cut for specified round pole
  • Optional cast, low copper aluminum horizontal slip-fitter with adaptor plate to secure the luminaire to 2" IPS pipe size arms
  • Optional cast aluminum wall mount plate assembly. Attaches to the wall over the junction box. Luminaire attaches to the wall plate
OPTICS
  • Optical cartridge system consisting of a die cast heat sink, LED Total Internal Reflection (TIR) optics, gasket and bezel plate
  • Molded silicone gasket ensures a weatherproof seal around each individual LED
  • Features revolutionary individual LED optical control based on high performance TIR optical designs
  • Optional BackLight Control for complete control of unwanted backlight
  • IP65 Optical assembly
  • Type 1, 2, 3, 4, 4W, 5W, 5QM, R, and L standard distributions
  • Available in Monochromatic Amber, 2700K, 3000K, 3500K, 4000K and 5000K
  • Die-cast, low copper aluminum heat sink modules provide thermal transfer at PCB level
  • Anodized aluminum heat sink modules
INSTALLATION
  • Fixtures must be grounded in accordance with national, state and/or local electrical codes. Failure to do so may result in serious personal injury
ELECTRICAL
  • Dimming range from 10% to 100% through the use of standard 0-10V interface on the programmable driver
  • Modular wiring harness in the service area provides user access to the dimming circuitry
  • Optional factory programmed dimming profile
  • Surge protection: 10kV surge suppression
  • SF for 120, 277, 347 Line volts
  • DF for 208, 240, 480 Line volts
CONTROLS
  • 7-pin Receptacle and Button Photocell
CERTIFICATIONS AND LISTINGS
  • Listed to UL1598 and CSA C22.2#250.0-24 for wet location and 40?C ambient temperatures
  • IDA approved, 3000K and warmer CCTs only
  • RoHS compliant
  • This product qualifies as a "designated country construction material" per FAR 52.225-11 Buy American-Construction Materials under Trade Agreements effective 6/06/2020. See Buy American Solutions
WARRANTY
  • 5 year warranty


Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

BRANDS > Kim Lighting > Kim Lighting Area Lights > ARA2
We Our Customers!

Thanks for shopping with us today

Click here to get a promo code for 10% off your next order

How can we help you?
Live Chat