Halo Recessed SLDSL6069S1EMWR 6" Surface LED Downlight, 120V, 600 Lumens, 90 CRI, Field Selectable 2700K, 3000K, 3500K, 4000K, 5000K, Matte White

Home > BRANDS > Halo Lighting > Halo Recessed Lighting > Halo LED Retrofit Recessed Lighting > Halo SLD6 LED Retrofit Surface Light Kits >

Our Price: $36.35

Usually Ships in 4-6 business days. Urgent Project? Contact Us.

Model: HALO-SLDSL6069S1EMWR

Qty:

Technical Spec

Downloads

Technical Spec
PRODUCT SPECIFICATIONS
Construction

Die cast aluminum trim ring, and die formed aluminum frame

Optics

Light guide provides uniform luminance from a low profile flat lens
AccuAim optics provide directional control for the "cone-of-ligh" beam distribution of a traditional downlight.
Precision molded lens features high transmission polymer with UV stabilized protecting film

Designer Trims Accessories (sold separately)

SLD designer trims are accessory rings that attach to the SLD for a permanent finish. Refer to SLD accessories specification sheet for details.
- White (Paintable)
- Satin Nickel
- Tuscan Bronze

Electrical Junction Box Mounting

SLD may be used in compatible electrical junction boxes in direct contact with insulation including spray foam insulation
Suitable for installation in many 3-1/2" and 4" square, octagon, and round electrical junction boxes
Note: Driver consumes 3 cubic inches of junction box
Installer must ensure compatibility of fit, wiring and proper mounting in the electrical junction box. This includes all applicable national and local electrical and building codes
Proprietary Slot-N-Lock quick installation system for junction box installation
T-bracket with Slot-N-Lock mounting tabs included

LED

Trilateral linear LED assembly is integrated in trim perimeter
Field selectable color temperature; select 2700K, 3000K, 3500K, 4000K or 5000K CC
90 CRI can be used for California Title 24 compliance/certified to Title 2
L70 at 50,000 hours projected in accordance with TM-21

LED Chromaticity

A tight chromaticity specification ensures LED color uniformity, sustainable Color Rendering Index (CRI) and Correlated Color Temperature (CCT) over the useful life of the LED
LED chromaticity of 3 SDCM exceeds ENERGY STAR color standards per ANSI.
90 CRI model features high color performance with R9 greater than 50
Every Halo LED is quality tested, measured, and serialized in a permanent record to register lumens, wattage, CRI and CCT.
Halo LED serialized testing and measurement ensures color and lumen consistency on a per-unit basis, and validates long-term product consistency over time

Electrical Connections
Junction Box

Compatible with 3-1/2” x 2” and 4” x 1-1/2” deep

round, square and octagon boxes (2-1/8” deep

boxes recommended)

• Supply Wire Adapter with LED quick connector

included

LED Driver

• Driver is a 120V input, high efficiency, dimmable

electronic power supply providing DC power to the

LED array

• Driver features high power factor, low THD, and

has integral thermal protection in the event of over

temperature or internal failure

• Driver is replaceable if it should be required

Dimming

• Designed for continuous dimming capability to

nominally 5% with many 120V Leading Edge (LE)

and Trailing Edge (TE) phase control dimmers.

• Dimming to 5% is best assured using dimmers with

low end trim adjustment.

• Consult dimmer manufacturer for compatibility

and conditions of use.

Note: Some dimmers require a neutral in the

wallbox.

Compliance

• UL Certified for use in US and Canada

• UL Certified Damp and Wet location listed.

• Suitable for use in closets, compliant with NFPA®

70, NEC® Section 410.16 (A)(3) and 410.16 (C)(5)

• SLD may be used in compatible electrical junction

boxes in direct contact with insulation including

spray foam insulation

• May be installed in IC recessed housings in direct

contact with insulation (Not for use in recessed

housings in direct contact with spray foam

insulation. Refer to NEMA LSD 57-2013)

• UL Classified when used in retrofit with listed

housings (See Housing Compatibility)

• EMI/RFI: meets FCC 47CFR Part 15 Class B

limits, and is suitable for use in residential and

commercial installations

• Airtight certified per ASTM E283 (not exceeding 2.0

CFM under 57 Pascals pressure difference)

• 90 CRI: Can be used to comply with California Title

24 High Efficacy requirements.

• Can be used for International Energy Conservation

Code (IECC) and Washington State Energy Code

high efficiency luminaire compliance

• ENERGY STAR® certified luminaire - consult

ENERGY STAR® Certified Product List

• Contains no mercury or lead and RoHS compliant.

• Photometric testing in accordance with IES LM-79

• Lumen maintenance projections in accordance with

IES LM-80 and TM-21

Warranty

• Five-year limited warranty

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

BRANDS > Halo Lighting > Halo Recessed Lighting > Halo LED Retrofit Recessed Lighting > Halo SLD6 LED Retrofit Surface Light Kits