The H25ICAT recessed housing is designed for residential and light commercial applications. The H25ICAT is designed for use in shallow ceilings and features full-frame robust construction, feed through listing, Got Nail! bar hangers; and may support the use of higher wattage lamps.
The wide variety of trims available allows a number of different lighting effects to be created with one basic housing. The H25ICAT is designed for use in shallow insulated ceilings and may be in direct contact with insulation*.
May be retrofit with compatible Halo LED lighting systems.

PRODUCT FEATURES
Housing

• Single wall aluminum housing
• Sealed and gasketed for Air-Tite ready installation
• Designed for insulated ceilings in direct contact with insulation* (May also be installed in non-insulated ceilings)
• Housing adjusts in plaster frame to accommodate up to 1-3/8" ceiling thickness

Socket Plate

• Rigid socket plate adjusts and locks without tools for various lamp sizes
• Socket plate and bracket may be removed when using socket supporting trims

Plaster Frame

Got Nail! Bar Hanger Bracket
Bar Hanger Features include:

• Pre-installed nail easily installs installs in regular lumber, engineered lumber and laminated beams
• Safety and guidance system prevents snagging, ensures smooth straight nail penetration and allows bar hangers to be easily removed if necessary
• Automatic leveling flange aligns the housing and lets you hold the housing in place with one hand while driving nails
• Five additional mounting points
• Mounting point on top for hanger wire connection
• Integral T-bar clips snaps onto T-bars - no additional clips required q-Channel bars with Pass-NThru
• q-Channel bars feature an unique inverted "q" interlocking channel for rigidity and stability
• Pass-N-Thru feature allows bars to cross-over for tool-less shortening in tight spaces less than 12" without removing from the plaster frame. Push bars together and flex at score hole break points
• Housing can be positioned at any point within 24" joist span
• Bar hangers may be repositioned 90° on the frame

Slide-N-Side™ Junction Box
Junction box features include:

• Slide-N-Side™ connectors allow non-metallic sheathed cable for both U.S. and Canada to be installed without tools and without removing knockouts
• Allows wiring connections to be made outside the junction box
• Simply insert the cable directly into the trap after connections are made
• accommodates the following standard non-metallic sheathed cable types:
  • (US) #14/2 , #14/3, #12/2, #12/3
  • (Canada) #14/2, #14/3, #12/2
• Positioned to accommodate straight conduit runs
• Seven 1/2" trade size conduit knockouts with true pry-out slots
• cULus Listed 26 in3 box volume
• Listed for through branch (8) No. 12 AWG branch circuit 90° C conductors through the box

Quick Connect™

• Three 4-port push-in "Quick Connect" wire nuts included in junction box
• Speed installation and increase reliability
• No additional wire nuts required
• Simply strip and insert supply wires

Socket:

• Porcelain socket with nickel plated brass screw shell
• Snaps into trim for consistent lamp positioning
• Overspray protector included

Thermal Protector:
Self resetting thermal protector deactivates fixture if overheating occurs due to improper lamping or misapplied insulation

Trims:
Halo Fit-All concept offers multiple trim options in a variety of design styles, and functional beam distributions to control beam angle and lumen delivery in accommodating various lamp types including Halogen, CFL and LED

Compliance

• cULus Listed 1598 luminaire
• cULus Listed damp location
• cULus Listed for wet location, covered ceiling, with select trims
• cULus Listed for feed through
• cULus Listed for direct contact with insulation and combustible material*
• Air-Tite code compliant. Certified under ASTM E283; not exceeding 2.0 cfm (0.944 L/s) air leakage rate tested at a 1.57 psf (75 Pa) pressure differential
• RoHS compliant

*Not to be used in direct contact with spray foam insulation (Consult NEMA LSD57-2013)