Request a Quote

  Home > BRANDS > Lutron > Energi TriPak > Modules >

Lutron RMJ-ECO32-DV-B PowPak dimming module with EcoSystem, 434 MHz, J-box Knockout Mount
Lutron RMJ-ECO32-DV-B PowPak dimming module with EcoSystem, 434 MHz, J-box Knockout Mount


 
Our Price: $142.50
Request Large Quantity Quote


Usually Ships in 3-5 business days. Urgent Project? Contact Us.




Model: LUTRON-RMJ-ECO32-DV-B
Qty:

Technical Spec Downloads
 
Technical Spec

The PowPak™ Dimming Module with EcoSystem® is a radio frequency (RF) control that operates up to 32 EcoSystem® ballasts based on input from Pico® controls and Radio Powr Savr™ sensors. Configurable for multiple zones in a single area, the Dimming Module with EcoSystem® is ideal for small areas such as classrooms, conference rooms, and private offices. Communication with RF input devices, such as Pico® controls and Radio Powr Savr™ sensors, is accomplished using Lutron Clear Connect® RF Technology.

Features and Benefits

  • Controls up to 32 EcoSystem® fluorescent dimming ballasts and LED drivers
  • Various operating voltages available—refer to model number chart below for details on voltage requirements
  • Receives input from up to nine Pico® controls, six Radio Powr Savr™ occupancy/vacancy sensors, and one Radio Powr Savr™ daylight sensor
  • Utilizes Lutron Clear Connect® RF Technology
  • Mounts to a junction box through a standard half-inch (NPT trade size) knockout
  • Complies with requirements for use in a compartment handling environmental air (plenum) per NEC® 2011 300.22(C)(3)
Model # RMJ-ECO32-DV-B
Operating voltage: 120/277 V~ 50 / 60 Hz
System Communication
  • Operates using Clear Connect™ RF Technology for reliable wireless communication; refer to model number chart on page 1 for frequency band details
  • RF range is 30 ft (10 m)
Environment
  • Ambient operating temperature: 32 °F to 131 °F (0 °C to 55 °C)
  • 0% to 90% humidity, non-condensing
  • For indoor use only
EcoSystem® Link
  • Communicates with up to 32 EcoSystem® enabled dimming ballasts, LED drivers, and interfaces such as C5-BMJ-16A
  • EcoSystem® Digital Link can be wired Class 1 or Class 2 for maximum wiring flexibility
  • Terminals accept 18 to 16 AWG (0.75 to 1.5 mm2) solid wire
    NOTE: Must use Rapid Start sockets with EcoSystem® ballasts.
    NOTE: The PowPak™ Dimming Module with EcoSystem® does NOT support the C5-XPJ-16A switching module.
    NOTE: Wired sensors connected to EcoSystem® devices are NOT supported.
Default Operation
  • Associated wireless input devices control all connected EcoSystem® ballasts and drivers
  • Occupancy Sensors:
    – Occupied: 100%; Unoccupied: 0% (OFF)
  • Pico® Controls:
    – On: 100%; Favorite Level: 50%; Off: 0% (OFF)
  • Daylight Sensor: Decreases electric light in response to additional available daylight
Key Design Features
  • LED status indicators show communication status and provide programming feedback
  • Power failure memory: If power is interrupted, connected loads will return to the previous level prior to interruption
  • EcoSystem® link miswire protection up to 347 V~
  • Daylight override: Pressing the raise button on an associated Pico® will temporarily override daylighting for the fixtures in that Pico® group
    – Daylighting will be re-enabled for that Pico® group when one of the following occurs:
    • Two hours have passed since the override.*
    • ON, OFF or Preset button has been pressed on a Pico® controlling that group.
    • All associated Occupancy Sensors have reported unoccupied.
    * Each time a daylighting override occurs for any Pico® group, the two hour timer is reset.

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

BRANDS > Lutron > Energi TriPak > Modules
We Our Customers!

Thanks for shopping with us today

Click here to get a promo code for 10% off your next order

How can we help you?
Live Chat