Lithonia WF4 ADJ SWW5 90CRI MW 4" Gimbal Wafer Housing-Free LED Downlight, IC/ Non-IC, New Construction/ Remodel, Switchable Color Temperature, 2700K-5000K, 90 CRI, Matte White

Home > BRANDS > Lithonia Lighting > Lithonia Recessed Lighting > Lithonia WF Series Wafer LED Downlight > 4 inch WF4 Series Wafer LED Downlight >

Alternative Views:

Our Price: $38.30

Usually Ships in 3-5 business days. Urgent Project? Contact Us.

Model: LITHONIA-WF4-110323

Qty:

Technical Spec

Downloads

Technical Spec
PRODUCT SPECIFICATIONS
HOUSING:

Polycarbonate injection molded outer frame, with steel back plate. Non-conductive dead-front trim design suitable for a wide range of applications and codes requiring a non-conductive lens
FT4 3-pin plenum rated cable connector to connect from module to remote driver box
Steel spring clip for easy installation. 4" and 6 cut out template is provided to ensure a correct sized hole is cut into ceiling for proper installation of the trim. Size of hole should not exceed 4-1/4" for the WF4 and 6-1/4" for the WF6
Can be installed from 3/8" to 1 ½" ceiling thickness
Can be removed from below the ceiling for service or replacement.

LED LIGHT ENGINE:

Switchable white color temperature from 2700K, 3000K, 3500K, 4000K, 5000K
90 CRI minimum
Color accuracy within 4 step McAdams Ellipse at the end CCT (2700K and 5000K), within 6 step McAdams Ellipse in the middle CCT (3000K, 3500K, and 4000K)
Dimming 100% to 10% with most standard incandescent dimmers (see list of approved dimmers).

DRIVER:

Connect directly to 120V Class-2 (CAN ICES-005 (B) / NMB-005 (B)) LED driver. 120V 60 Hz constant current driver provides noise free operation
IC rated driver with convenience of a switch to choose between 5 selectable color temperature options ranging from 2700K (warm white), 3000K, 3500K, 4000K, or 5000K (daylight)
The isolated driver with integrated inside steel remote box has four 7/8" knockouts with slots for pryout. Suitable for pulling wires with the 12 cubic-inch wiring compartment to accommodate up to (6) 14 gauge insulated conductor, or (4) 12 gauge insulated conductors; making the Wafer LED Downlights much easier to wire in 2in/2out (plus ground) daisy-chain applications
2" plenum space required for the installation of the WF6 driver box, and 3"plenum space required for the installation of the WF4 driver box
Suitable for installation in t-grid and drop ceiling applications with universal new construction pan.

OPTICAL SYSTEM: Edge-lit LED technology uses light guided plate to distribute light • Polycarbonate lens provides even illumination throughout the space • Efficient system that can produce over 729 lumens while using 10W (WF4) and 1007 lumens while using 12W (WF6) • Replaces 65W incandescent (WF4) and 75W incandescent (WF6). LIFE: Rated for 50,000 hours at 70% lumen maintenance.

LABELS:

CSA certified to US and Canadian safety standards
ENERGY STAR certified product
Suitable for wet location, covered ceiling
Air-Loc certified in accordance with ASTM E283-2004
NOM Certified
Can be used to comply with California Title 24 Part 6 High Efficacy LED light Source Requirements
U.S. Patent No. 10,681,784. TESTING: All reports are based on published industry procedures; field performance may differ from laboratory performance.

WARRANTY:

3-year limited warranty

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

BRANDS > Lithonia Lighting > Lithonia Recessed Lighting > Lithonia WF Series Wafer LED Downlight > 4 inch WF4 Series Wafer LED Downlight