Certain airborne contaminants may adversely affect the functioning of LEDs and other electronic components, depending on various factors such as concentrations of the contaminants, ventilation, and temperature at the end-user location. Click here for a list of substances that may not be suitable for interaction with LEDs and other electronic components.

CONSTRUCTION -- The 20-gauge cold rolled steel housing, 18-gauge cold rolled steel door frame, tamperresistant fasteners and polycarbonate lens stand-up to abuse. Swing-arms are 18 gauge, unpainted galvanized steel. Polycarbonate lens is UV stabilized and is available in two different thicknesses to meet demanding requirements. Number of visible door fasteners may vary. Tamper-resistant fasteners are TX15 security-type Torx fasteners requiring a special tool or bit for access. Tool and bit are not included with fixture.
Finish: All CRS (cold rolled steel) parts are finished with electrostatically deposited, thermally set, polyester powder paint after fabrication.

OPTICS -- Long-life LEDs, coupled with high-efficiency drivers, provide extended service life. Lumen maintenance of L80/60,000 hours, L70>100,000 hours.

ELECTRICAL -- Thermally protected, resetting, Class P, HPF, non-PCB, UL listed, CSA certified driver is standard.
LED driver delivers dimming from a 0-10V control signal. Dims to 1% standard.
Luminaire Surge Protection Level: Designed to withstand up to 6kV/3kA per ANSI C82.77-5-2015

INSTALLATION -- Lay-in grid or in-ceiling sheet rock installation using swing-arms with range from 1" to 2" grid height. See drawings for other critical dimensions. Swing-arms are not intended to secure fixture without additional support. The VRTL utilizes tamper-resistant fasteners to prevent unauthorized access to luminaire. A TX15 Security Torx Screwdriver or TX15 Security Torx® Bit is required to remove the door and access the internal luminaire components for installation or service. The TX15 Security Torx® Screwdriver or bit is NOT SUPPLIED with fixture.

LISTINGS -- CSA certified to meet U.S. and Canadian standards (UL1598 and UL8750) or NOM certified. IC rated. Damp location listed standard. For use in ambient temperatures ranging from -4°F (-20°C) to 104°F (40°C) with the exception of 10000LM(1X4), 12000LM(2X2) and 20000LM(2X4). These lumen packages are for use in ambient temperatures ranging from -4°F (-20°C) to 77°F (25°C).

BUY AMERICAN ACT -- Product with the BAA option is assembled in the USA and meets the Buy America(n) government procurement requirements under FAR, DFARS and DOT regulations.
Please refer to www.acuitybrands.com/buy-american for additional information.
DesignLights Consortium (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions are qualified.

WARRANTY -- 5-year limited warranty.