INTENDED USE -- Provides a minimum of 90 minutes illumination for the rated wattage upon loss of AC power. Ideal for applications requiring attractive LED unit equipment with quick installation and unparalleled performance. Certain airborne contaminants can diminish integrity of acrylic and/ or polycarbonate. Click here for Acrylic Environmental Compatibility table for suitable uses.

CONSTRUCTION -- White, compact, low-profile contemporary design. Engineering-grade thermoplastic housing is impact-resistant, scratch-resistant and corrosion-proof. UV-stable resin resists discoloration from natural and man-made light sources. Unit is also available in black.
Low-profile, integrated test switch/pilot light. Easily visible multicolor LED status indicator.
Unique track-and-swivel arrangement permits full range of direction of lamp head adjustment.
Universal J-box mounting pattern. Tool-less access for maintenance. US Patent No. D483,511.

OPTICS -- Two high-performance LED lamp heads rated at 5.4 watts each, delivering a total of 1,045 lumens with the LP06VS lamp; or 3 watts each, delivering a total of 536 lumens with the LP03VS lamp option. Two white LEDs per head provides a redundant light source that ensures emergency lighting performance. The typical life of an LED is 10 years.
Linear Pattern (LP) is designed for uniform emergency lighting applications.
Advanced electrical design provides constant light output throughout the entire discharge period.
Single fixture illuminates a 75’ long 6’ wide path of egress at a 12’ mounting height.

ELECTRICAL -- Universal input voltage capability (120 through 277V, 50 or 60Hz).
Power factor correction is greater than 0.9 at 120V (0.7 at 277V) which contributes to increased efficiency and energy savings.
Current limiting charger maximizes battery life and minimizes energy consumption while providing lower operating costs and short circuit protection.
Thermal protection senses battery temperatures and terminates charge current to prevent overheating.
Regulated charge voltage maintains a stable charge voltage over a wide range of line voltages.
Prevents over/undercharging that shortens battery life and reduces capacity.
Brownout protection is automatically switched to emergency mode when supply voltage drops below approximately 80 percent nominal of 120, 220 or 277. Other input voltages may vary.
AC/LVD reset allows battery connection before AC power is applied and prevents battery damage from deep discharge.
Battery: Sealed, maintenance-free Lithium Iron Phosphate. Automatic 24-hour recharge after a 90-minute discharge.
Diagnostics: Continuously monitors AC functionality. Test switch provides manual activation of 30-second diagnostic testing for on-demand visual inspection.
Standard derangement monitoring will indicate disconnected battery, charger failure and display an amber indicator light while in Emergency mode.
Self-diagnostics (SD option): Single multi-chromatic LED indicator to display two-state charging, test activation and three-state self-diagnostics.
Self-diagnostic testing: Five minutes every 30 days and 90 minutes annually.
Diagnostic evaluation of: Lamps, AC to DC transfer, battery charging and condition and microprocessor.
Automatic test is easily postponed for eight hours by activating manual test switch or use of remote tester.

INSTALLATION -- Ceiling mount standard. Flexible conduit entry provision on top of the unit.
US Patent No. D483,511.

LISTINGS -- UL damp location listed standard 10.8-watts at 50°-104°F (10°-40°C) or 16.2-watts, 32-watts and 43-watts at 77°-104°F (25°-40°C). Meets UL 924, NFPA 101 (current Life Safety Code), NEC and OSHA illumination standards. Meets all applicable FCC requirements.

WARRANTY -- 5-year limited warranty.