Request a Quote

  Home > BRANDS > Halo Lighting > Halo Recessed Lighting > Halo LED Recessed Lighting > Halo 3 Inch LED Integrated Recessed Lighting > Halo 3 Inch LED Integrated Recessed Housings > Halo HL36A Round Shallow Directional Housing, No Optics >

Halo Recessed HL36A20927ED010ICAT 3" Round Shallow Directional IC New Construction LED Housing, 20W, No Optic, 90 CRI, 2700K Color Temperature, 120V Phase Cut 1% Dimming, 120-277V 0-10V 1% Dimming
Halo Recessed HL36A20927ED010ICAT 3" Round Shallow Directional IC New Construction LED Housing, 20W, No Optic, 90 CRI, 2700K Color Temperature, 120V Phase Cut 1% Dimming, 120-277V 0-10V 1% Dimming


 
Alternative Views:


Our Price: $130.13
Request Large Quantity Quote


Usually Ships in 4-6 business days. Urgent Project? Contact Us.




Model: HALO-HL36A20927ED010ICAT
Qty:

Technical Spec Downloads
 
Technical Spec
PRODUCT SPECIFICATIONS
Frame
  • Galvanized steel plaster frame with integral bar hanger receivers
  • Setscrew provide positive horizontal locking
  • Collar adjusts vertically to accommodate 1/2" to 7/8" thick ceilings and locks in position with (4) screws
  • Use optional collar extender for 7/8" to 1-1/4" thick ceilings
  • Integral gun sights facilitate the use of guide strings or laser lines
  • Shipped with overspray protector installed
Housing
  • Steel housing painted matte black for a visually dark interior
  • Removable top allows service from above
Bar Hangers
  • GOT NAIL! Gen 3 bar hangers adjust from 10-1/2" to 24" wide
  • Captive nail penetrates standard and engineered lumber
  • Mounting flange levels platform with ceiling
  • Integral clip attaches directly to tee-bar
Gaskets
  • Gaskets achieve restrictive airflow requirements without additional caulking
Adjustment Mechanism
  • Rotates 365 degree , tilts 45 degree and locks in position maintaining any aiming angle
  • Angle markings assist in repeatable settings
  • Translating center beam optics aligns axis of primary reflector with aperture from nadir to 45 degree
Trim Retention
  • Attached by (8) rare earth Neodymium magnets, holds trim securely to the ceiling
  • Tether secures trim to housing during service or adjustment
LED Module
  • LED array is field replaceable
  • Proximity phosphors over chip on board LEDs provide a uniform source with high efficiency and no pixilation
  • Color accuracy within 3 SDCM and 90 CRI minimum
  • Passive cooling achieves L70 at 50,000 hours
Primary Optic
  • Precision molded TIR optics deliver highly efficient and uniform patterns
  • Various patterns are available and can be interchanged without tools
Media
  • Integral media holder accepts up to (2) 2" diameter 3.0mm thick color filters or lens
  • Order color filters and lens separately
Trims
  • Die cast aluminum trims are available in open, lens and lens wall wash styles
  • Polymer non-conductive trim meets many local code requirements for ‘dead front’
  • Physical and optical cutoff provides visual comfort
  • Light trap eliminates spill light with flange
  • Multiple finishes to match many décors
  • Available in self-flanged or rimless styles with optional rimless adapter
Shielding
  • Micro-prismatic lens standard with lens trims
  • Hinged to allow rimless trim removal
Driver
  • Field replaceable constant current driver provides noise free operation
  • UNV 120-277VAC 50/60Hz input
  • Continuous, flicker-free 1% dimming, available with LE and TE phase cut (at 120V only) and 0-10V analog control
Junction Box
  • Galvanized steel junction box with 18in3 internal volume
  • Listed for (12) #12 AWG 90 degree C splice conductors
  • (7) 1/2" conduit pry-outs positioned to allow straight conduit runs
  • (3) Slide-N-Side non-metallic (NM) wire traps
  • Accepts 14-2, 14-3, 12-2, 12-3 U.S. and 14-2, 14-3, 12-2 Canadian NM cable
  • (3) 4-port push wire nuts mains voltage connections
Compliance
  • Type IC inherently protected, suitable for direct contact to air permeable insulation and cULus listed for damp locations
  • Not for use in direct contact with spray foam insulation, consult NEMA LSD57-2013
  • Wet location listed in covered ceilings. Housing is IP20 certified and when installed with a lens trim IP55 certified below the ceiling in covered ceiling applications only
  • Airtight per ASTM-E283-04
  • Suitable for use in clothes closets when installed in accordance with the NEC 410.16 spacing requirements
  • EMI/RFI emissions per FCC 47CFR Part 15 consumer limits
  • Contains no mercury or lead and RoHS compliant
  • Photometric testing in accordance with IES LM-79-08
  • Lumen maintenance projections in accordance with IES LM-80-08 and TM-21-11
  • Can be used for State of California Title 24 high efficacy LED compliance under JA8, reference Modernized Appliance Efficiency Database System (MAEDBS) for 2016 JA8 High Efficacy Lighting
  • ENERGY STAR certified, reference certified light fixtures database
Warranty
  • Five year limited warranty


Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

BRANDS > Halo Lighting > Halo Recessed Lighting > Halo LED Recessed Lighting > Halo 3 Inch LED Integrated Recessed Lighting > Halo 3 Inch LED Integrated Recessed Housings > Halo HL36A Round Shallow Directional Housing, No Optics
We Our Customers!

Thanks for shopping with us today

Click here to get a promo code for 10% off your next order

How can we help you?
Live Chat