Request a Quote

  Home > BRANDS > Halo Lighting > Halo Recessed Commercial > Halo Recessed 4" Commercial LED > Halo Recessed 4" Commercial LED Housing >

Halo Recessed Commercial HC420D010REM7 4" New Construction and Remodeler Housing, 2000 Lumens, 120-277V, 0-10V, 1%-100% Dimming, 7W Emergency Module with Remote Test
Halo Recessed Commercial HC420D010REM7 4" New Construction and Remodeler Housing, 2000 Lumens, 120-277V, 0-10V, 1%-100% Dimming, 7W Emergency Module with Remote Test


 
Alternative Views:


Our Price: $369.23
Request Large Quantity Quote


Usually Ships in 4-6 business days. Urgent Project? Contact Us.




Model: HALO-HC420D010REM7
Qty:

Technical Spec Downloads
 
Technical Spec
PRODUCT FAMILY SPECIFICATIONS
Housing Frame
  • Boat shaped galvanized steel plaster frame with adjustable plaster lip
  • Accommodates 1/2" to 1-1/2" thick ceilings
  • Installs in new construction or from below the finished ceiling (non-accessible) for remodeling
  • Provided with two remodel clips to secure the frame to the ceiling
Universal Mounting Bracket
  • Adjusts 2" vertically from above and below the ceiling
  • Use with the included mounting bars or with 1/2" Electric Metallic Tube (EMT)
  • Removable to facilitate remodeling installation from below the finished ceiling
Mounting Bars
  • Captive pre-installed No Fuss mounting bars lock to T-grid with screwdriver or pliers
  • Centering detents allow for consistent positioning of fixtures
Driver
  • Field-replaceable constant current driver provides low noise operation
  • Universal 120-277VAC 50/60Hz input standard
  • Continuous, 1% to 100% dimming with 0-10V analog control
  • Optional low-voltage DC driver for use with Distributed Low Voltage Power (DLVP) system
  • Distributed Low Voltage Power (DLVP) system combines power, lighting and controls with ease of installation (refer to DLVP Design Guide at www.cooperlighting.com for details)
Emergency Option
  • Provides 90 minutes of standby lighting, meeting most life safety codes for egress lighting
  • Available with integral or remote charge indicator and test switch
  • Available Self-Test (self-diagnostic) with remote charge indicator and test switch
  • Rapid Response emergency ordering option for quick-turn projects
Connected Lighting System Options
Two WaveLinx connected systems to choose. Summary information provided below, refer to WaveLinx system specifications and application guides for details.
WaveLinx System Tilemount Sensor Kit
  • WaveLinx WTA tile mount sensor kit offers daylight dimming, PIR motion sensing, scene and zone configuration, automatic commissioning; and optional RLTS - Real Time Location Services available.
WaveLinx Lite System Tilemount Sensor Kit
  • WaveLinx Lite WTK tile mount sensor kit offers daylight dimming and PIR motion sensing, scene and grouping configuration.
WaveLinx Tilemount Kits Application
  • The WTA and WTK tilemount kits include a control module mounted on the luminaire junction box via 1/2” knock-out, and a tilemount sensor on 54-inch whip; for ceiling installation by direct-mount spring clips or via mounting bracket in octagon ceiling boxes.
  • The WTA and WTK tilemount kits may be ordered as factory installed on the luminaire, or ordered eparately as a field installed accessory kit.
Junction Box
  • Galvanized steel junction box
  • 20 in3 internal volume excluding voltage barrier
  • 25 in3 internal total volume
  • Voltage barrier for 0-10V dimming wires (occupies one 1/2" pry-out space)
  • Listed for eight #12 AWG (four in, four out) 90 degrees C conductors and feed-thru branch wiring
  • Three 1/2" and two 3/4" trade size pry-outs available
  • Three 4-port push wire nuts for mains voltage with 1-port for fixture connection
Compliance
  • cULus Listed to UL 1598 / C22.2 No. 250.0, suitable for damp locations and wet locations in covered ceilings only
  • Emergency options provided with UL Listed emergency drivers to UL 924 / C22.2 No. 141, suitable for indoor/damp locations
  • IP20 - Above finished ceiling; IP64 - Below finished ceiling
  • Non-Insulated ceiling (Non-IC) rated for 2000, 2500, 3000, 3500, 4000, 4500, 5000, 5500, 6000 lumen models (insulation must be kept 3" from top and sides)
  • Insulated ceiling (IC) rated for 500, 750, 1000, 1500 lumen models and suitable for direct contact with air permeable insulation* (IC models are also suitable for Non-IC installations)
  • Non-IC marked spacing required for 4500, 5000, 5500, 6000 lumen models
    • Marked Spacing Center to Center of Adjacent Luminaires = 36”
    • Center of Luminaire to Building Member = 18”
    • Minimum overhead = 0.5”
  • Airtight per ASTM-E283-04
  • Suitable for use in clothes closets when installed in accordance with the NEC 410.16 spacing requirements
  • EMI/RFI emissions FCC CFR Title 47 Part 15 Class A at 120/277V
  • Contains no mercury or lead and RoHS compliant
  • Photometric testing completed in accordance of IES LM-79-08
  • Lumen maintenance projection in accordance of IES LM-80-08 and TM-21-11
  • 1,000 and 1,500 lumen, 90 CRI, ICAT models may be used to comply with State of California Title 24 residential code, per JA8 certification standards
  • May be used to comply with State of California Title 24 non-residential code as a dimmable LED luminaire
  • ENERGY STAR certified, reference certified light fixtures database
*Not for use in direct contact with spray foam insulation, consult NEMA LSD57-2013
Warranty
  • Five year limited warranty


Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

BRANDS > Halo Lighting > Halo Recessed Commercial > Halo Recessed 4" Commercial LED > Halo Recessed 4" Commercial LED Housing
We Our Customers!

Thanks for shopping with us today

Click here to get a promo code for 10% off your next order

How can we help you?
Live Chat