Technical Spec
PRODUCT DESCRIPTION The Halo H4 LED is a family of 4" aperture recessed downlight H457 series of housings designed for exclusive use with Halo EL406, ELG406, ELSG406 Series LED Light Engines and compatible 4" TL4 and TLS4 LED trims. Halo H4 LED housings have integral LED drivers that offer dimming as a standard feature.This is a Non-IC, AIR-TITE remodel housing designed for noninsulated ceiling installations, universal voltage 120V-277V input, and dimming with either 120V phase control dimmers, or 0-10V DC control systems. The H4 LED series offers high quality downlighting along with high efficacy -- the result being great lighting and significant energy savings.
PRODUCT SPECIFICATIONS MECHANICAL (A) Housings Single wall aluminum housing. Openings are gasketed for AIR-TITE installation. 5 1/2" height allows use in 2"x 6 joist construction. AIR-TITE aperture gasket is pre-installed. (B) Remodel Arm Spring steel construction designed for ease of installation and ceiling support of LED driver.
MOUNTING (C) Remodel Springs Four remodel clips secure housing and accommodate 1/2" and 5/8" ceiling material.
ELECTRICAL (D) Junction Box
- Seven 1/2" trade size conduit knockouts with true pry-out slots
- Slide-N-Side connectors allow non metallic sheathed cable to be installed without tools and without removing knockouts.
- Accepts a wide range of non-metallic sheathed cables
- The standard cable types used in lighting in both U.S. and Canada.
- Allows wiring connections to be made outside the junction box.
- Simply insert the cable directly into the trap after connections are made.
- Accommodates the following standard nonmetallic sheathed cable types:
- US: #14/2, #14/3, #12/2, #12/3
- Canada: #14/2, #14/3, #12/2
LED Connection
- LED connector is non-screw base offering easy plug-in installation with the H4 LED 2nd Generation EL406, ELG406, ELSG406 Series LED Light Engines.
- LED connector meets highefficacy luminaire requirement for a non-screw base socket, and where required to qualify as a high-efficacy luminaire (California Title-24).
LED Driver
- LED dimmable driver mounts to the housing junction box.
- Driver is a120V-277V Universal Voltage, high efficiency, electronic power supply providing low voltage power to EL Series LED Light Engines.
- Driver meets FCC EMI/RFI Consumer Level limits for use in residential and commercial installations.
- Driver features high power factor and low THD and has integral thermal protection in the event of over temperature or internal failure.
- Driver is specifically designed for compatibility with EL406 LED Light Engines, and ELG406, ELSG406 Adjustable Gimbal Light Engine / Trims.
- If dimming is not required the fixture can be operated from a standard wall switch
Dimming - Phase Control The HALO H4 LED luminaire is designed for dimming capability to 10% in normal operation with most 120V leading edge (LE) and trailing edge (TE) phase control dimmers. (Consult dimmer manufacturer for application/ compatibility/loading. Note, some dimmers require a neutral in the wallbox).
Dimming - 0-10V
- Dimmable to 10% in typical operation with compatible 0-10V DC low voltage dimmers.
- 0-10V DC dimmers operate using two low voltage dimming wires (color coded violet and gray). The low voltage dimming wires are separate from the 120V AC or 277V AC power.
- Switching on/off is controlled via the line voltage (120V AC or 277V AC) power, and dimming is controlled via the 2-wire 0-10V DC low voltage wiring.
Warranty Cooper Lighting Solutions provides a five year limited warranty on Halo LED Luminaires which includes the LED Recessed Housing, LED Light Engine, and LED trims. Labels
- UL/cUL Listed 1598 Luminaire
- UL/cUL Listed for Damp Location
- UL/cUL Listed for Wet Location, covered ceiling - with select trims
Qualifications
- ENERGY STAR® Certification.**
- Use with designated LED light engines and trims for for State of California Title 24 high efficacy luminaire compliance
- Use with designated LED light engines and trims for International Energy Conservaction Code (IECC) high efficacy luminaire compliance
AIR-TITE
Certified under ASTM-E283 and listed UL/cUL 1598. May be used to meet restricted air-flow requirements.
|