Halo Recessed H36LVTAT 3" New Construction, Air Tight, 12V MR16, GU5.3 Socket, Non-IC Type Housing

Home > BRANDS > Halo Lighting > Halo Recessed Lighting > Halo MR16/PAR16 Recessed Lighting > Halo MR16/PAR16 3 inch Recessed Lighting > Halo MR16/PAR16 3 inch Low Voltage Recessed Housings >

Alternative Views:

Our Price: $63.68

Usually Ships in 4-6 business days. Urgent Project? Contact Us.

Model: HALO-H36LVTAT

Qty:

Technical Spec

Downloads

Technical Spec
PRODUCT DESCRIPTION
H36LVTAT is a Non-IC AIR-TITE™ fixture for use with H3 3" series trims. Housing is AIR-TITE rated to prevent airflow between heated or air conditioned spaces and unconditioned attic areas. For use with 12V MR16 lamps. Non-IC Housing is AIR-TITE™ but insulation must be kept 3” away from all sides of housing.

PRODUCT SPECIFICATIONS
Housing

Formed of 20 gauge CRS with white powder coat finish.

Plaster Frame
Housing adjusts in plaster frame to accommodate up to 1-1/2" ceiling thickness. Galvanized steel construction.

Plaster frame features include:

Regressed locking screw for securing hanger bars.
Cutouts for easily crimping hanger bars in position.
Halo name embossed on plaster frame.
The housing may be removed from the plaster frame to provide access to the junction box.
Pre-installed AIR-TITE gasket

Got NAIL!™ Bar Hangers

Pre-installed nail easily installs in regular lumber, engineered lumber and laminated beams.
Safety and guidance system prevents snagging, ensures smooth straight nail penetration and allows bar hangers to be easily removed if necessary.
Automatic levelling flange aligns the housing and lets you hold the housing in place with one hand while driving nails.
Housing can be positioned at any point within 24" joist span
Pass-N-Thru™ feature allows bar hangers to be shortened without removing from plaster frame.
Score lines allow "tooless" shortening for 12” joists.
Bar hangers may be repositioned 90°.
Integral T-bar clip snaps onto T-bars - no additional clips required.

Junction Box

UL Listed for through branch circuit wiring (maximum 8 No.12 ga., 90°C conductors).
Four 1/2” trade size conduit knockouts with true pry-out slots are positioned to accommodate straight conduit runs.
Three Slide-N-Side™ wire traps allow non-metallic sheathed cable to be installed without tools and without removing knockouts. Accepts a wide range of nonmetallic sheathed cable.
- Allows wiring connections to be made outside the junction box.
- Simply insert the cable directly into the trap after connections are made.
- Three push-in wirw connectors are included and eliminate the need for separate wire nuts.
- Accommodates the following standard non-metallic sheathed cable sizes:
  - (US) #14/2, #14/3, #12/2, #12/3
  - (Canada) #14/2, #14/3, #12/2

Transformer
Integral 120V dual-tap magnetic transformer steps 120V or 277V line voltage down to 12V nominal lamp operating voltage. Housing is rated for up to 50W MR16 lamps. Housing ships as 277V model with 120V transformer wire lead capped.
For use in 120V systems, simply cap the 277V wire lead and use 120V lead (refer to wiring diagram).

Socket
GU5.3 socket for 12V MR16 lamps

Labels

UL/cUL Listed 1598 Luminaire
UL/cUL Damp Location Listed
UL/cUL Listed for Feed Through
Certified Under ASTM-E283 for air tight construction

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

BRANDS > Halo Lighting > Halo Recessed Lighting > Halo MR16/PAR16 Recessed Lighting > Halo MR16/PAR16 3 inch Recessed Lighting > Halo MR16/PAR16 3 inch Low Voltage Recessed Housings