PRODUCT DESCRIPTION
The H1499TAT is a small aperture low voltage Non-IC AIR-TITE housing for providing accent and task lighting. The H1499TAT is designed for use in non-insulated ceilings. Non-IC Housing is AIRTITE but insulation must be kept 3 inches away from all sides of housing.

PRODUCT FEATURES
Housing
Formed of CRS with powder coat finish.

Plaster Frame

• Galvanized steel construction.
• The inner housing can be removed from plaster frame to provide access to the junction box.
• Plaster frame features include:
  • Patented regressed locking screw positioned for securing hanger bars from below the ceiling.
  • Cutouts for easily crimping hanger bars in position.
  • AIR-TITE gasket is pre-installed.
  • HALO name embossed on plaster frame

SLIDE-N-SIDE Junction Box

• Positioned to accommodate straight conduit runs
• Seven 1/2" trade size conduit knockouts with true pry-out slots
• Slide-N-Side wire traps allow non metallic sheathed cable to be installed without tools and without removing knockouts.
• Accepts a wide range of non-metallic (type NM) sheathed cables - the standard cable types used in lighting in both U.S. and Canada.
  • Allows wiring connections to be made outside the junction box
  • Simply insert the cable directly into the trap after connections are made.
  • Accommodates the following standard non-metallic sheathed cable sizes:
    • (US) #14/2, #14/3, #12/2, #12/3
    • (Canada) #14/2, #14/3, #12/2

"Quick Connect" Connectors

• Three quick connect wiring connectors included.

Socket

• GU5.3 socket with reflector plate for bi-pin 12V MR-16 lamps.

Transformer
Integral 120V magnetic transformer steps line voltage down to lamp operating voltage. For lamps up to 50W.

Thermal Protector
Thermal protector deactivates fixture if overheating occurs due to improper lamping or misapplied insulation.

Labels