The E7ICATNB can save installation time. It is designed without a socket plate for use with socket supporting trims only. With these trims there is no need to spend time removing the socket plate and the fixed lamp position of socket supporting trims saves on lamp adjustment time too.
*Not to be used in direct contact with spray foam insulation (Consult NEMA LSD57-2013).

PRODUCT FEATURES
Housing

• Single wall die-formed aluminum housing
• Housing features a precision rolled interlocking collar which maintains aperture geometry for greater assurance of installation results
• Integral gasket for code-required gasket between fixture and finished ceiling - seals aperture without need for additional caulk
• May be removed from the plaster frame to provide access to junction box

Plaster Frame

• Galvanized steel frame. Housing adjusts in plaster frame to accommodate up to 3/8” - 1” ceiling thickness.
• (2) Regressed locking screws for securing hanger bars
• Integral Air-Tite gasket seals housing and meets code-required gasket
• between fixture and finished ceiling

Socket

• Porcelain socket with nickel plated brass screw shell
• Snap-in socket speeds installation and attaches directly to the trim for consistent lamp positioning
  

Thermal Protector

• Self resetting thermal protector deactivates fixture if overheating occurs due to improper lamping or misapplied insulation.

Trims

• Halo Fit-All concept offers multiple trim options in a variety of design styles, and functional beam distributions to control beam angle and lumen delivery in accommodating various lamp types including Halogen, CFL and LED

Compliance

• cULus Listed 1598 Luminaire
• cULus Listed Damp Location
• cULus Listed for Wet Location, covered ceiling, with select trims
• cULus Listed for direct contact with insulation and combustible material*
• Air-Tite code compliant. Certified under ASTM E283; not exceeding 2.0 cfm (0.944 L/s) air leakage rate tested at a 1.57 psf (75 Pa) pressure differential
• RoHS compliant

*Not to be used in direct contact with spray foam insulation (Consult NEMA LSD57-2013).