Due to COVID, freight companies are experiencing temporary logistical delays.

Request a Quote

  Home > BRANDS > Firex > All Firex Alarms >

Firex 10200 Carbon Monoxide Detector Battery Powered (DC)
Firex 10200 Carbon Monoxide Detector Battery Powered (DC)

This item has been discontinued from the manufacturer.
Please click here for a possible replacement.
Our Price: $45.60

Model: FIREX-10200

Technical Spec Downloads
Technical Spec

This FireX carbon monoxide alarm uses a Monox® electrochemical sensor and shall have an alarm horn that emits 85 decibels at 10 feet. The built-in red LED flash is accompanied by four fast horn beeps when dangerous CO levels are detected (10% or more COHb potential). The yellow LED flash is accompanied by two quick horn beeps per minute when unit is not functioning properly and needs replacement. The unit performs a silent internal system test to verify sensor operation monthly. The 10200 shall meet the requirements for UL and CUL.

The 10200 series carbon monoxide alarms shall be 5” in diameter (12.7 cm) and shall be powered by a 9 volt battery. This alarm shall be rated at no greater than 0.05 amp in standby. Operating temperature shall be between 40°F to 100°F (4.4°C to 37.8°C) and relative humidity between 15%-95%. Item 10200 shall operate independently. Both CO alarms and smoke alarms need to be installed in those areas to be protected.

  • EXCLUSIVE Monox Sensor with True-Test CO Sensor Diagnostics - Verifies the carbon monoxide sensor and electronics are working properly, and warns when the sensor is nearing the end of its service life.
  • EXCLUSIVE Automatic Monthly Self-Test - Alarm performs a silent internal system test to verify CO sensor operation.
  • EXCLUSIVE True End of Life Replacement Alert - End of service life is detected from the carbon monoxide sensor in the alarm and provides warning that the unit should be replaced.
  • Front Loading Battery Door - Eliminates battery handling during installation and allows for safe and convenient battery replacement.
  • Battery Pull Tab - Makes installation faster and easier, reducing callbacks due to battery failure. Simply pull tab, close door and press test button.
  • Smart Quiet Low Battery Silencer - Silences low battery alert up to 10 hours.
  • Quick Quiet False Alarm Control - Quiets unwanted carbon monoxide alarms for up to six minutes.
  • Dust Cover Protects from dust, dirt, fumes or other common contaminants during construction, reducing false alarms and callbacks.
  • Ramp-up Horn - Protects your hearing when testing the alarm by building up the decibel level slowly, giving you time to move away from the horn before the full alarm sequence begins.
Item 10200
Model COE-B
Weight 8 ounces
Operating Temperature 40° - 100°F
Electrical Rating 9V DC battery powered
Horn Output 85 decibels at 10 feet
Listings UL 2034
Detection Type Electrochemical
Humidity Range 15% to 95% relative humidity

Firex 10200 diagram

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

BRANDS > Firex > All Firex Alarms
BRANDS > Firex > Firex Smoke Alarms
We Our Customers!

Thanks for shopping with us today

Click here to get a promo code for 10% off your next order

How can we help you?
Live Chat