Technical Spec
Description This high-tech yet easy to use dimmer takes your home into the future by giving you the ability to set the speed at which the light fades On and Off, a preset on-level for always remembering your favorite brightness level and best of all being able to remotely control the dimmer from a handheld remote, wall keypad, computer or mobile phone (controllers are sold separately). With high-end quality, at-a-glance LED status and remote controllability, you'll see how easy it is to create your own home of the future. Similar to the best selling SwitchLinc Dimmer, this newest member of the SwitchLinc family has the ability to communicate using both the electrical wires in the home as well as using radio frequency (RF). This increases reliability not only for the dimmer but for all devices on an INSTEON home control network (similar to the function of an Access Point). The SwitchLinc installs like a traditional wall switch with the exception of requiring connection to neutral. Most homes have a neutral wire available (see How to check if I have neutral wires?). Once installed setup is quick and easy using a simple Plug-n-Tap programming. Features & Benefits - Control this dimmer remotely from anywhere
- Programmable on-level and fade on/off speed
- Featuring dual-band INSTEON technology for the fastest and most reliable performance
- Doubles as an Access Point
| Manufacturer Product No. | 2477D, INSTEON SwitchLinc Dimmer (Dual-Band), White | | UPC | 689076401746 | | Color | White | | Warranty | 2 years, limited | | On-Levels | 32 locally, increments of 1% with software | | Ramp Rates (full-ON to full-OFF): | 0.125 to 9 seconds if programmed locally, 0.125 seconds to 8 minutes if programmed remotely | | LED Indicator | 9 White LEDs, Optional Green, Blue, Amber, or Red with #2400L kit | | Operation Modes | INSTEON only, X10 only, INSTEON and X10 Combo Mode | | Combo Mode Message Order | INSTEON, X10, INSTEON cleanup | | Multi-Way Circuit Support | One SwitchLinc Dimmer controls load, Cross-Link any number of SwitchLinc Dimmers or other INSTEON Controllers | | Setup Memory | Non-volatile EEPROM | | Addresses | 1 hard-coded out of 16,777,216 possible | | Links | 417 | | Powerline Frequency | 131.65 KHz | | Minimum Transmit Level | 3.2 Vpp into 5 Ohms | | Minimum Receive Level | 10 mV | | Messages Repeated | Yes | | Paddle Type | True rocker action | | Wire Nuts | 4 included | | Mounting | Mounts in single or multiple-ganged junction box. Control 200 W less load for each immediately adjacent SwitchLinc Dimmer installed. For example, 600 W load control becomes 400 W with another dimmer to the immediate right or left. Use a triple-gang box with a mechanical switch in the center to avoid de-rating. | | Operating Conditions | Indoors, 40 to 104°F, up to 85% relative humidity | | Dimensions | 4.1" H x 1.8" W x 1.2" D | | Weight | 3.6 oz | | Supply Voltage | 120 Volts AC +/- 10%, 60 Hertz, single phase | | Surge Protection | MOV rated for 150 Volts | | Neutral Wire | Required | | Maximum Amps: | 15 Amps | | Power Wire Leads | 6", 16 AWG, stranded,600V, 105°C insulation, ends stripped and tinned, LINE (black), LOAD (red), NEUTRAL (white) | | Load Types | Wired-in incandescent lighting devices | | Ground Lead | 6", 18 AWG, stranded, bare copper | | Maximum Load | 600 Watts (uses 12-Amp triac dimmer) | | Certification | Safety tested for use in USA and Canada (ETL #3017581) | | X10 Primary Address | 1 optional (comes unassigned) | | X10 Scene Address | 255 possible | | X10 Status Response | Supported | | X10 Powerline Frequency | 120 KHz | | X10 Resume Dim | Supported (by setting Local On-Level to zero) | | X10 Minimum Transmit Level | 3.2 Vpp into 5 Ohms | | X10 Minimum Receive Level | 20mV into 5 Ohms | | X10 Messages Repeated | No |
|
us
